The process of creating a fence consists of several stages. You can see detailed work descriptions with a photo of a wooden fence with your own hands to better understand the installation rules. There are three main stages in the construction of the fence:
- site preparation;
- installation, assembly of the structure;
- element processing.
If the area is littered, the area must be cleared. Then you can start marking. It is necessary to mark where the support posts for the fence, gates, gates will be located. In determining the depth of the pits in which the supports will be installed, it is necessary to adhere to certain rules to ensure the fence’s reliability and durability. This indicator depends on the height of the column.
Marking the site for installing a fence.
For supports of small height up to a meter, holes are dug 80 centimeters deep. If the height of the column is 1-1.5 m, you need a hole 1 meter deep. For higher supports, the indicator is half their length. The width of the pit depends on the diameter of the support. There should be a distance of about 20 centimeters from the hole’s edges to the support.
Wooden poles must be protected from the negative influence of the soil. To prevent rotting, premature destruction of the tree allows the treatment of the lower end with fire and a special preparation from biological parasites. Then it needs to be covered with resin wrapped with roofing material. If it is planned to install a fence with a large weight, metal plates are attached to the support soles, which provide stability, eliminating the inversion of the pillars due to the load.
Treat the lower end with fire and special preparation.
The post installed in the hole must be fixed. For this, spacers and longitudinal bars are used. Then you need to prepare a concrete solution. It is poured into the pit around the support, providing reliable fixation stability. Further work can be started after the concrete hardens completely. This will take several days.
Logs are mounted to the installed supports. There are two ways to fasten the veins. The simplest option is to lay log-on support fix it with hardware.
This technique allows you to quickly mount the fence, but the reliability of the result is not very high. In the photo of beautiful wooden fences with your own hands, you can see how neat the fence looks, in which the veins are installed in a specially cut groove. This technique requires a certain amount of time and effort. However, this mount looks beautiful and provides the structure with maximum reliability.
Fastening horizontal veins.
When choosing a lag, it is necessary to focus on the dimensions of the elements of the front layer. The thickness of the vein corresponds to this indicator of the board, picket fence. Its width should be twice as large.
The installation of face-covering elements depends on the type of fencing. You can view photos of beautiful fences in the areas choose the optimal position of pickets boards. If you need to give an original look, to provide beautiful contours of the top of the fence, the elements are given the required length, the upper parts of the pickets are processed.
The greatest simplicity is the installation of fences made of the corrugated board under a tree. After installing the supports to fix the veins, sheets can be fixed. Self-tapping screws are used in the installation.
Are you looking for the best fence contractors? Look no further than the trusted experts like us. We offer a wide variety of fencing options to choose from, so you can find the perfect fence to enhance your property. We also provide professional installation and repair services, so you can be sure your fence is installed correctly and will last for years.